How Much Does It Cost to Relocate Washer and Dryer Hookups?

Washer and Dryer Hookups Relocation Cost Breakdown

Moving washer and dryer connections typically involves more than just relocating the appliances. It often requires new plumbing work, proper venting for the dryer, and updated electrical outlets. If the dryer uses gas, extending a gas line will also add to the expense. All of these adjustments come on top of the cost of setting up the machines in their new location.

Installing a Washing Machine Cut-Off Valve

To control the water flow to a washing machine, a shut-off valve is required. The price for this type of valve is typically between $40 and $70 per line.

Building a Drain Line for the Washer

Shifting a washing machine becomes much more complicated once plumbing work is required. One of the biggest expenses is installing a new drain line, which can range from about $400 to $1,840 depending on its distance from the current plumbing system. Attempting the job on your own carries risks—if something goes wrong, hiring a plumber to fix it quickly can end up costing far more. In fact, emergency plumbing services may be up to three times higher than standard rates.

Installing Electrical Outlets and Circuits

A standard washing machine operates on a typical 120-volt outlet, while dryers usually require a stronger 240-volt connection. Installing a new outlet for a washer generally runs about $340, whereas setting up a 240-volt plug for a dryer can be closer to $540, depending on the specific plug style your dryer needs. In some cases, you might also need to seal off an unused gas line, which typically adds another $165 to the bill.

Running a Gas Line (Gas Dryers Only)

When setting up a gas dryer in a different space, you’ll also need to budget for extending gas lines to that area. The price depends on the distance, usually averaging about $60 per foot. SD Appliance Repair. Overall, installing a new line can range anywhere from a couple hundred dollars to several thousand, with longer runs costing significantly more.

Dryer Vent Installation

Since dryers must release hot air outdoors, adding a vent is often necessary. Installing one usually costs around $140, though the price can climb to $1,040 if the vent has to extend a longer distance.

Repairing Drywall

Once the new hookups are in place, it’s common to need a bit of drywall patching. Small repairs may start at about $140, and in some cases, the electrician or plumber handling the installation might include this in their labor. Occasionally, moving a washer and dryer exposes hidden issues like moisture damage or mold. If that happens, bringing in a mold specialist is the safest way to identify the problem and decide on the right solution.

Installing the New Machines

After all the connections are ready, the appliances still need to be put in place. Some new machines come with installation included, but if not, you can hire a local installer. The service usually costs between $90 and $215 for each unit.

Cost to Relocate Washer and Dryer Hookups by Project Type

The price of relocating a washer and dryer depends heavily on where in the house they’re being moved. Certain areas already have simpler access to plumbing and electrical lines, making the job easier and less costly. SD Appliance Repair. Moving the setup to a garage, for example, will likely differ in price from relocating it to an upper floor. Here are some typical options along with their estimated costs.

Moving to Another Wall or Room

Often, people move their washer and dryer either to another wall in the same room or to a different room on the same level. This usually makes use of current plumbing and electrical lines, with only minor additions like extending pipes or adding a vent. Costs for these simpler moves tend to fall on the lower side, roughly between $1,040 and $1,540, depending on what connections are already in place.