How Much Does It Cost to Repair a Washing Machine by Part?

Drum Bearings Replacement

The drum bearings in a washing machine typically last about a decade. If you notice strange noises coming from the machine and adjusting the load doesn’t resolve the issue, replacing the drum bearings is likely necessary. This repair, including labor, generally costs between $190 and $240.

Clutch Repair

The clutch in a top-loading washing machine plays a key role in rotating the tub during operation. The clutch may be the issue if your laundry comes out too wet or you hear a squeaking noise during an empty cleaning cycle. Additionally, the clutch could require attention if the drum fills with water, but there’s no motor sound or spinning. Repairing this component typically costs around $290.

Pump Replacement

Replacing a washing machine pump can involve more than straightforward maintenance tasks like clearing a drain or freshening up the tub. The pump typically costs around $80, while the labor for this repair is usually priced at approximately $340.

Water Inlet Valve Replacement

The water inlet valve is crucial in regulating water flow and filling the tub in a washing machine. Replacing this part typically costs around $200, with variations depending on the brand.

Transmission Repair

Like a car, your washing machine relies on transmission to keep its drum spinning and shifting through the necessary cycles for effective cleaning. Repairing or replacing this essential component typically costs between $140 and $390.

Motor Repair

The motor is a vital component that drives the functionality of your washing machine. Repairing it generally costs between $360 and $440.

Timer and Belt

The timer regulates the duration of each cycle in a washing machine, and its repair costs range from $160 to $270. The belt, which links the motor to the drum to enable spinning, typically costs between $180 and $190 to fix.

Drain Hose

The drain hose directs water out of the washing machine’s tub. Repairing this component typically costs between $170 and $290.

Door

Replacing a washing machine door or lid and locking mechanism usually costs between $90 and over $240. If professional installation is needed, labor charges can add $140 to $240 or more to the overall expense.

Control Board

The cost to replace a washing machine control board depends on the appliance’s make and model. Typically, replacement parts for the control board can cost between $140 and $340. Additional labor fees generally range from $140 to $240 if professional installation is necessary.

Gasket

The cost of a washing machine gasket, also referred to as the door seal or rubber boot, generally falls between $90 and $240, depending on the machine’s make and model. High-end models may require more expensive gaskets. If professional installation is needed, labor charges can add an extra $140 to $240 or more to the overall cost.

Drum

Replacing a washing machine drum can be quite costly, typically ranging from $240 to $540 or higher, depending on the brand and model. Drum replacements may be more expensive for specialized machines. If professional installation is necessary, it can add $240 to $440 or more to the total cost.

Coupling

Replacing a washing machine coupling usually costs $60 to $80 for the part alone. Depending on your location and whether you hire a local technician, labor charges can add $140 to $240 or more.

Pressure Switch

Replacing a washing machine pressure switch usually costs between $60 and $90. Labor fees can differ based on location and whether you hire a professional, typically adding another $140 to $240 or more to the overall cost.

Shut off Valve

Replacing a washing machine shut-off valve generally falls between $50 and $70, depending on the valve’s type and quality. If professional installation is needed, labor fees typically range from $140 to $240 or more, depending on where you are and the technician’s rates.

Shock Absorbers

Replacing washing machine shock absorbers usually costs between $60 and $90 each, depending on the machine’s brand and model. Since most washers have more than one shock absorber, the overall cost can increase if all need to be replaced. If you require professional installation, labor fees typically range from $140 to $240, depending on the location and service provider.

Shock Absorbers

Replacing a washing machine spider arm can be costly, typically ranging from $140 to $340 or more, depending on the machine’s brand and model. If professional installation is required, labor fees can add another $140 to $240 or more. The overall cost may vary based on factors like the machine’s make and model and the availability of replacement parts. For a more precise estimate, contacting appliance repair services or manufacturers is recommended, as costs can change based on your specific situation and location.

Shock Absorbers

The price of replacing a washing machine agitator can differ based on the brand and model. Typically, replacement parts for the agitator cost between $60 and $140. If you require professional installation, labor charges usually range from $140 to $240 or more.